8500A Peak Power Analyser

8500A
Peak Power Analyser

Key Features

Rise time < 15 ns
Sensor frequency range from 0.03 or 0.75 to 18.5, 26.5 or 40 GHz
Power Range : -20 to +20 dBm Pulse; -40 to +20 dBm CW
Measurement resolution is 100 ps
Measure the same point on repetitive pulses at over 70 measurements/second
Built-in power sweep calibrator with NIST traceable accuracy
8500A

The Giga-tronics 8500A Series Peak Power Meters combine CW power measurement with the ability to make precise peak power measurements at any point on a pulsed waveform. This dual, built-in capability lets you make CW measurements and analyse pulsed waveforms with a single instrument.

The meter is available in a single or dual channel configuration. A built-in display shows measurements such as rise time, fall time and pulse width plus the pulse profile. And you can use a reference cursor to read peak power at any point on the pulse waveform.

Giga-tronics CW and Peak power sensors contain an EEPROM programmed with the frequency calibration factors measured at the factory, or in your cal lab. When you key in the frequency at which power is being measured, the meter automatically applies the correct cal factor from the sensor EEPROM.

Home | Contact Us | Map

Timing Test & Measurement