IPTV Systems

The SEM-IPTV Lite allows you to receive up to eight DVB-T digital terrestrial multiplexers and to stream them across a network

 

A mixture of DVB-T and DVB-S signals can be received and streamed across an IP network with the facility to add a locally encoded channel with the SEM-Stream Gateway.

 

The SEM-STREAM product has the ability to manage up to six encoder cards allowing you to feed uncompressed content (in composite analogue, SD-SDI or HD-SDI) across an IP network.  It can  also be loaded with decoder cards so that the IP content can be turned back in to composite analogue, SD-SDI or HD-SDI again.

 

Finally we have the SEM-IPTV which allows both  DVB-T & DVB-S signals to be received, local channels to be encoded and software to allow VoD applications to run giving a very scalable and flexible solution.

KEY BENEFITS

 

  • Choice of different IPTV solutions dependant on complexity and budget
  • Ability to receive DVB-T and DVB-S/S2 signals and stream them over IP
  • Options for adding your own corporate branding through the Electronic Program Guide (EPG)
  • Options available for Pay TV, VOD and digital signage available

SEM-IPTV Lite

This is a complete IPTV solution in a box which is easy to configure and operate. Using a standard terrestrial TV areal, it will automatically scan and tune in to up to eight digital multiplexes and allow you to then distribute these signals over a LAN or WAN network either unicast or multicast. Up to two encrypted multiplexers can also be accommodated and a built in Electronic Program Guide (EPG) is provided.

 

Additional resources > Datasheets
SEM-IPTV Lite

SEM-STREAM

SEM-STREAM is a chassis based product that facilitates multiple channel contribution links over IP. Content will be encoded at constant bit rate (CBR) in MPEG2 format at the transmit end and can be received by another SEM-STREAM box at the far end or by standard IRDs

Additional resources > Datasheets
SEM-STREAM

SEM-STREAM Gateway

SEM-STREAM Gateway is a chassis based solution allowing the mixture of DVB-T, DVB-S and encoder cards to be inserted in to a 1RU or 3RU frame and multiplexed on to an IP output stream. This solution will give you increased flexibility over the SEM-IPTV Lite product.

Additional resources > Datasheets
SEM-Stream Gateway

SEM-IPTV

SEPM-IPTV uses the SEM-STREAM chassis as the main component of the solution. This solution is a very scalable system using plug in cards for the receivers and encoders and a separate PC for handling the management and middleware. By doing this, the system can expand in complexity as your requirements grow.

Additional resources > Datasheets
SEM-IPTV